Using octave designations, the range is C ♭ 1 to G ♭ 7. Tuned in C ♭ major, the range of the harp is from the C ♭ three octaves below middle C to three and a half octaves above, usually ending on G ♭. It is also possible to play many chords in traditional harmony by adjusting pedals so that some notes are enharmonic, a central part of pedal harp technique. Other scales, diatonic and synthetic, can be obtained by combining the pedals. This can be indicated by verbal statements at the beginning of a composition, for example, "Tune low C to C ♭", or "If necessary, tune high G to G ♯". However, they can also be tuned sharp or flat prior to performance. These strings are normally tuned to C ♮, D ♮, and G ♮ respectively. Three strings have no pedal tuning mechanism: the lowest C and D and the highest G. In the bottom position, the second, lower disc operates, shortening the string again to create a sharp and giving the scale of C ♯ major if all pedals are used. In the middle position, the top disc's pins press against the string, resulting in natural notes and giving the scale of C ♮ major if all pedals are used.
Youtube how to tune a lyon and healy harp pedal harp s free#
In the top position, the strings are free and all notes are flat. However, for convenience, harp parts are notated in C ♭ rather than B, even when other instruments are written in B.Įach pedal has three positions. C ♭ major is equivalent to B major, and for most instruments B major is a far more common key to use as it has five sharps rather than seven flats. In the normal state (pedals not operated) the strings are tuned to all flat pitches, the scale of C ♭ major. Earlier pedal harps had a single-action mechanism that provided only sharped notes, the first of which was made in 1720 by Jacob Hochbrucker in Bavaria. In 1807 Charles Groll was the first to register a patent (patent number 3059) where the harp mechanism was doubled with two lines of fourchettes (forks). The double-action pedal system was first patented in London by Sebastien Erard in 1801 (patent number 2502) and 1802 (patent number 2595). The only completely chromatic harps are the double (arpa doppia) and triple (Welsh) harps and cross-strung harp. Smaller harps, often called folk, lever or Celtic harps, also have only seven strings per octave, and use a mechanical lever on each string that the player must move manually for chromatic alterations. No matter how the pedals are set, the pedal harp still has only seven strings per octave and therefore can play seven notes per octave. Pedal harps are essentially diatonic instruments with the double-action pedal mechanism providing chromatic alterations and key changes. In each position the pedal can be secured in a notch so the foot does not have to continuously hold it in position (unlike piano pedals). The discs are studded with two pegs that pinch the string as they turn, shortening its vibrating length. When the player presses a pedal, small discs at the top of the harp rotate. Each pedal attaches to a rod or cable in the column of the harp, which connects to a mechanism in the neck. The pedals, from left to right, are D, C, B on the left side and E, F, G, A on the right. The seven pedals each affect the tuning of all strings of one pitch-class. The mechanical action of the pedals changes the pitches of the strings. Pedals for harp tuning were first introduced in 1697. The tip of a string is shown in blue, points in contact with the string are shown in red, and points not in contact with the string are in green. The action of the wheels in the pedal system to change the pitch of a string. The total tension of the strings on the soundboard is roughly a ton (10 kilonewtons). The lowest strings are made of copper or steel-wound nylon, the middle-lower of catgut, and the middle to highest of nylon, although more or all of the strings may be gut. The D, E, G, A, and B strings are normally colored white, while the C strings are colored red and the F strings either black or blue. The body of the harp consists of a straight upright pillar, sometimes adorned with a crown at the top a soundboard, which in most harps is pear-shaped with additional width at the bottom, although some older instruments have soundboards that are straight-sided but widening toward the bottom a harmonically curved neck containing the mechanical action made up of over 1,400 parts and a base with seven pedals. A pedal harp typically stands about 1.8 m (6 ft) high, is 1.2 m (4 ft) deep, and 55 cm ( 21 + 1⁄ 2 in) wide at the bass end of the soundboard.